فلاشة تابلات G-TAB P706M مسحوبة ب InfinityBox CM2SPD
السلام عليكم و رحة الله و بركاته
نقدم لكم فلاشة تابلات G-TAB P706M مسحوبة ب InfinityBox CM2SPD
رابط الفلاشة عفوا ,,, لايمكنك مشاهده الروابط لانك غير مسجل لدينا [ للتسجيل اضغط هنا ]
كلمة فك الضغط
gsmtechdz.com
كود PHP:Read Info
Chinese Miracle II [SPD module] v 1.27
Set mode to : SP [SC773x] eMMC [Generic 4.x-5.0]
Operation : Check/Read Info [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 97 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FLASH : eMMC Flash , Structure : Ok!
Reading extended info ...
Model Name : k03_tyht_p706m_7inch_64_8_dt
Model Brand : G-tab
Model Device: k03_tyht_p706m_7inch_64_8
AndrVersion : 5.1
BaseBand CPU: K03_TYHT_7INCH_64_8
CompileDate : 06/07/2017 08:27:15
Project Ver : LMY47D release-keys
Model Ext : P706M
ExtraInfo : HWInfo not exists, normal phone
Elapsed: 00:00:26
Reconnect Power/Cable!
Read FullFlash
Operation : Read FullFlash [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 97 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 97 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 97 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : k03_tyht_p706m_7inch_64_8_dt
Model Brand : G-tab
Model Device: k03_tyht_p706m_7inch_64_8
AndrVersion : 5.1
BaseBand CPU: K03_TYHT_7INCH_64_8
Project Ver : LMY47D release-keys
Model Ext : P706M
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_1024x600.bin
Skip [EMP] : FBOOTLOGO
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img
AndroidInfo created
Firmware Size : 2143 MiB
Saved to : C:\Utilisateurs\GSMTECH\K03_TYHT_7INCH_64_8_k03_tyht _p706m_7inch_64_8_5.1_LMY47D_release-keys_P706M\
Done!
Elapsed: 00:10:12
Reconnect Power/Cable!
رد مع اقتباس
المشاركة الأصلية كتبت بواسطة gsmtech
عفوا ,,, لايمكنك مشاهده الروابط لانك غير مسجل لدينا 