كود:
Operation : Read Flash [ v1.16 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 067D5F16
ID_BLOCK_L : 93550FF766CCF9F4D388485592E96961
ID_BLOCK_L : 542F91383DA4169F32FDD60F05E886C5
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Boot Ok!
Brand : TCL
ProdName : 5051X
ProdModel : 5051X
Device : POP45
AndroidVer: 6.0.1
Manufact. : TCL
QLMxCPU : MSM8909
DevInfo : MSM8909__TCL__TCL__ANDR_v6.0.1__5051X__POP45__5051X
Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : boot.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : nvram.img
[Read Ok] : perso.img
[Read Ok] : splash.img
[Read Ok] : secro.img
[Read Ok] : misc.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : system.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
Android Info saved!
Read finished!
Configuration : MSM8909 / eMMC
Firmware Size : 1608 MiB
Done!
Elapsed: 00:05:32
Reconnect Power/Cable!
Loading firmware ...
Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand : TCL
Device Manufact.: TCL
Device Model : POP45
Device CPU : MSM8909
Device IntName : 5051X
Device Version : 6.0.1
CU_SWVer : TCL
Device Compile : 2/15/2017 1:56:19 AM
Device ExtInfo : 5051X
Load Ok!
Device Brand : TCL
Device Manufact.: TCL
Device Model : POP45
Device CPU : MSM8909
Device IntName : 5051X
Device Version : 6.0.1
CU_SWVer : TCL
Device Compile : 5/15/2017 2:46:28 AM
Device ExtInfo : 5051X
Load Ok!
فلاشة alcatel 5051x مسحوبة على cm2qlm
العرض العادي
